I have written about my struggles with insomnia previously, thankfully though its not been something I have struggled with since around 2016 when I was prescribed melatonin and the antidepressant Mirtazapine . Both have improved my sleeping habits immensely. I also take a low dose of amiltriptyline to prevent migraines and again this helps me sleep....until last Sunday night (18th November).
Sunday nights have been a sleeping issue for me as long as I can remember. I think the sleeping problems started over the anxiety of going back to school on the Monday. Throughout my school years I was bullied, so going to school was a cause of anxiety. If ever anyone says to me their school days were the best of their lives I want to punch them in the face. For me they were a source of misery and I never knew who would be gunning for me next. Primary school was particularly awful, comprehensive school was slightly better but I just felt so out of place there having come from a tiny school of less than 400 pupils to then be amongst over 800.
After school I then had the Monday morning work anxiety. I would be ok on Sunday until about 5pm and then I would begin to worry about events that would take place at work during the week. Again I was the target of two bullies unfortunately both were my boss and when one left the business the other one jumped right in and took their place. I loved my job and was good at it but it did absolutely nothing for my mental health.
So now after years of Sunday night anxiety its ingrained in me and I can never sleep or settle down for sleep very easily on a Sunday evening. So when it happened this Sunday I just shrugged my shoulder and thought oh well I'll sleep Monday. Yet when Monday came around the same thing happened no sleep. I put Mondays lack of sleep down to having bloods being done on Tuesday morning. Its always a drama getting blood out of me. It was it took 2 people three attempts. I've got a lovely blown vein on the back of my hand.
Tuesday was also dramatic as our washing machine broke down, well died to be more accurate. It was about 5 years old and had been a really good machine - washing machines don't seem to last very long in this house. Probably due to the dogs stuff that fills the waste pipe with sand. I have a Rug bag which is what horse owners put their horses rugs in to stop all the dirt etc going into the machine - its a bit like a lingerie bag for horses lol! A new machine was ordered and set up for delivery the following day. We can't be without a machine when we have two elderly dogs who have accidents.
So when I lay tossing and turning last night I presumed I was anxious about the new machine being delivered. I wasn't remotely anxious I just couldn't drop off to sleep and if I did drop off I was only staying asleep for ten minutes or so. Today I am exhausted three nights of very little sleep has destroyed me after being used to sleeping again. On all three nights out of desperation I have increased my melatonin, added in an extra amiltriptyline and then last night I toyed with taking my last diazepam which is my emergency pill for either the dentist or when my neck pain is off the charts. I don't have the doctors until next week and I will ask about an additional prescription of diazepam as when the neck pain is bad its the only thing that relives it.
Last night well technically this morning I didnt drop off until gone 02.30am , at 7am I received a text message to tell me that our new washing machine would be with us in 20 minutes. So bang went any chance of managing to sleep for a bit longer. Jay has gone back to bed. He can fall asleep pretty much whenever and wherever he wants. I am unable to do that and I am always terrified if I sleep during the day I wont sleep at night. So today I will push through until I can't go on any longer. My plans of using my embroidery machine have gone out of the window. I am so out of it I'd be a danger to myself holding a pencil let alone using machinery. If I didn't have a load of things being delivered today I would have crawled back into bed right now, regardless of not being able to sleep tonight.
Insomnia causes my pain levels to increase, my mood to plummet and makes me thoroughly miserable. I hate not sleeping because the knock on effects can last weeks. Its been so long since I have had a run of three nights that I had forgotten how bloody awful insomnia makes me feel.
Fingers crossed that at some point this week I fall asleep before 2.30am!
Life with possibly undiagnosed Myasthenia Gravis, diagnosed severe autonomic dysfunction and Ehlers Danlos Syndrome hypermobility type.
Thursday, 22 November 2018
Thursday, 15 November 2018
Balancing Act neck pain v embroidery machine
In last weeks blog post I told you all about my new toy, my embroidery machine. I've had it for 9 days (Tuesday) and I was very well-behaved last week. I had a quick play on Tuesday and then knuckled down to finishing off a whole heap of half-finished projects. I really dislike having incomplete work loitering and taking up space. Last week I had part made soft toys hanging around - the body parts of 15 toys to be exact and some part made Christmas stockings, along with three gnomes. I did have a really good crack at them and managed to clear all the owls, gnomes, Christmas stockings and two foxes. However one of the foxes still has his brains *stuffing* exposed as my hands have been too painful to attempt to close the turning gap. My hands are so sore this evening I am having to write my blog post using my speech to text function, which is fun!
My neck has at times been horrifically painful. Now I know how easy it is to exaggerate pain. People bandy around the word agony at the drop of a hat but still manage to get on with day-to-day living. When I say agony I mean no painkillers are touching it, my rib cage feels like it's collapsing inwards, I want to puke and I can't move very much. It isn't like this all the time thank goodness but it can start within seconds of sitting at a table or doing anything that involves lifting my arms away from my sides. The only thing that helps is putting on my soft collar and heat. The problem with heat though is that it will trigger a hot flush or can make me feel faint. I've found that when it's at its worst diazepam helps as it tends to trigger muscle spasms. As does gin but I don't like drinking every day and I have to keep it to the bare minimum.
I thought the embroidery machine maybe a way of being creative without triggering the neck pain...I was wrong. Sitting in any chair where my back is not properly supported, is a massive trigger. I don't tend to get the pain when sat on the sofa because I am not sat bolt upright. I am now waking up with the pain during the night, which means whilst sleeping something is slipping out of alignment. When this happens the only thing I can do is put my soft collar on for a few hours and hope that its enough to work as along with the neck pain I get a thumping headache. I do thankfully have a doctors appointment at the end of this month. I must have blood tests next week as the doctor was concerned that I possibly have vitamin deficiencies which are causing the pins and needles in my arms / hands / legs and face. However as a soft collar gets rid of all my problems I'd hazard a guess that my neck is unstable and this is the problem. Quite common in people with EDS but a nightmare to get diagnosed in the UK.
I had to limit my sewing to just short bursts with lots of breaks. Which meant I didn't feel very productive at all during the week. I did manage to wait until Sunday before I played on my embroidery machine again.
Saturday my neck and back was awful so I spent the afternoon looking on my chromebook for free embroidery patterns. I downloaded quite a few. I also found on Etsy two really lovely Unicorn patterns. One cost me a whopping 87p! and the other £1.50. I was so proud of myself using my USB port adaptor as my new chromebook has a micro USB port, ( I've had to upgrade my chromebook as my mark one chromebook can't transfer data between a USB stick and the chromebook or vice versa. It can read them you just can't do anything with it, not very good when you have an embroidery machine that you can use downloaded patterns on). So on Sunday I decided I would give the USB stick a go on my embroidery machine. To my delight the patterns showed up straight away. I had been panicking that maybe I would have to format the USB sticks for them to be used by the embroidery machine but it all worked fine.
I decided I would try out the Unicorn patterns on some face cloths that I had bought as a job lot from Amazon. I already had some Madeira Avalon Film wash away stabiliser, so it was just a case of setting up the hoop - face cloth then stabiliser laid on top to stop the stitches sinking into the pile. Then place it in the hoop ensuring its wrinkle free and as taut as possible. This took me several attempts, purely as I just wasn't feeling very confident with what I had done. The first one I messed up as I managed to sew the top right hand corner of the washcloth to the back of the design. I had to cut it out of the hoop! Apparently this is a common mistake so I didn't feel so bad. The second one however came out perfectly.
I also managed to centre it on the wash cloth perfectly.
I did the second one later on in the day. When I started it I hadn't realised there were 21 thread changes. The first Unicorn had been 10, so a massive difference. I loved the small details of the flowers and leaves which you can't really see in the photo. Again I managed to centre this one properly as well. So these will be Christmas gifts. The stabiliser washes away. I cut off the excess as I will be able to use that on small bits of embroidery and then put both flannels in lukewarm water where it just vanishes. I put them both in the washing machine to ensure all traces of stabiliser had gone.
On Monday afternoon I had a quick play as I fancied seeing what the redwork would look like.
It's not a good photo and to be honest I am not happy with it. The tension is out or I have threaded the machine poorly as bobbin fill has come to the surface so there are lots of little white dots all throughout the redwork. Mr Myasthenia Kid wants to frame it and take it into work for his noticeboard. So I will cut it down and run a zig zag stitch around the edge so it doesn't fray.
Today I had a go at this Christmas Wreath. The wreath came out beautifully but the "Merry Christmas" has come out terribly. Again either the tension was off or I had threaded the machine poorly. It's all a learning process. I have spent a bit of time this evening looking through the manual and found out lots of things I should have known!
I am really enjoying using the machine and learning all about it. The patterns it comes loaded with are really stunning. It's only the unicorns that I have bought and a dear friend on instagram lent me some USB sticks with lots of designs on to copy.
So if I can get a balance between my neck pain and time that I can use my machines I will be happy!
Subscribe to:
Posts (Atom)



